| Accessories | Bicycles | Parts | Specials | Tools |
|---|

Complete Sturmey-Archer Hubs: | |||||||
|---|---|---|---|---|---|---|---|
| New production from Taiwan The quality of the new Taiwanese production appears to be considerably improved, compared with the British products of the last few years. | |||||||
See: Sheldon Brown's Raleigh Twenty | |||||||
This model offers direct drive and 7 higher gears, up to 305% of direct drive, making it especially suitable for use on small-wheel bikes. Comes with twist shifter, 25 tooth 1/8" sprocket (only size currently available.) Over Locknut Dimension (rear spacing) anywhere from 115 to 135 mm, depending on what nuts/washers you use. It comes set for 124 mm with two 6 mm locknuts on the left end. You only need one locknug. If you remove one of the 6 mm locknuts, the spacing becomes 118 mm. If you replace the other locknut with a standard Sturmey-Archer 3 mm locknut, you can get it down to 115 mm. Check the gear ratios on: Sheldon Brown's Internal Hub Gear Calculator No other 8-speed hub goes this narrow for older frames without re-spacing.1840 grams | |||||||
| Part number | Type | Model | Brake | Drilling | Price | Note | |
| ZHU82 | New! 8 speed | XRF8 | 36 hole | $169.95 | See above Description | ||
| S-RF3 | 3 speed | S-RF3 | 36 hole | $99.95 | Updated version of the classic AW, with aluminum shell, thicker spoke flanges to fit modern spokes. | ||
| X-FD | Front | X-FD (Formerly ELITE/VT) | alloy drum brake | 36 hole | $69.95 | sealed bearings | |
| X-FDD | Front | X-FDD | alloy drum brake WITH Dynohub generator! | 36 hole | $85.95 | That's rignt, both a drum brake AND a 6 volt 3 watt generator in the same hub! A super item for the serious commuter. See Lighting section for details | |
To order, please email.
Make sure to include the part numbers and descriptions of the parts you want.For parts with the "Buy It Now" button, ordering by Web is the best way to go, with the least chance of confusion or error.
Custom Wheelbuilding
Wheels hand-built by Harris CycleryWe build custom wheels, with care and attention to detail. Standard charges: |
![]() |
|---|
If you bring in existing wheels to be rebuilt, add $10 per wheel for cutting the old spokes, cleaning and prepping your hub.
We will re-use your old hubs if you wish, but will not use used spokes nor rims.
Copyright © 2006, 2008 Harris Cyclery